How to Service Blower Control Switches on 2000 Jeep Wrangler?

In order to service the blower motor switch disconnect the battery negative cable. Dislodge the switch knob, take out the Heater-A/C control off the panel, and unscrew the blower motor switch. To install, reverse the procedure, screw tightening to 2.2 Nm (20 in. lbs.).

OEM 2000 Jeep Wrangler Blower Control Switches

HVAC Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Control Switches found

View related parts
2000 Jeep Wrangler Blower Motor Switch Part Number: 4882790
$12.06 MSRP: $17.45
You Save: $5.39 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - Blower Switch; Climate Control Module; Knob Blower Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.5 x 1.5 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4882790
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Wrangler Dash Control Unit Part Number: 55037341AB
Product Specifications
- Other Name: Control - A/C; Climate Control Module
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.3 x 8.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037341AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Wrangler Blower Control Switches Parts and Q&A

Q: How to Service Blower Control Switches on 2000 Jeep Wrangler?
A: In order to service the blower motor switch disconnect the battery negative cable. Dislodge the switch knob, take out the Heater-A/C control off the panel, and unscrew the blower motor switch. To install, reverse the procedure, screw tightening to 2.2 Nm (20 in. lbs.).