How to service an Oil Pressure Switch on 2001 Chrysler LHS?

Servicing the oil pressure sender, raise the vehicle and install an oil container under it. Defuel the electrical connector, remove the screw of the switch using a wrench, and use Mopar Thread Sealant before attaching back. Connect the connector again, lower the car, turn in the engine, look at the leaks, and correct the amount of oil.

OEM 2001 Chrysler LHS Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2001 Chrysler LHS Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Chrysler LHS Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2001 Chrysler LHS Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2001 Chrysler LHS?
A: Servicing the oil pressure sender, raise the vehicle and install an oil container under it. Defuel the electrical connector, remove the screw of the switch using a wrench, and use Mopar Thread Sealant before attaching back. Connect the connector again, lower the car, turn in the engine, look at the leaks, and correct the amount of oil.