How to Remove and Replace a Piston in an Engine on 2001 Chrysler Town & Country?

In order to change the piston, disconnect the battery, then take off the cylinder heads and oil pan, and ridge reamer when necessary. Take out the piston and connecting rod assembly, label it. Install new staggered-ring gaps pistons and make sure they are correctly oriented. Install connecting rod bolts, reassemble cylinder heads and pour in oil in the crankcase.

OEM 2001 Chrysler Town & Country Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pistons found

View related parts
2001 Chrysler Town & Country Piston Part Number: 4666129AA
$233.40 MSRP: $347.00
You Save: $113.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod
- Replaces: 5019338AB
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.6 x 6.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4666129AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- EL, EX, LX, LXi, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.8 L GAS
View related parts
2001 Chrysler Town & Country Piston Part Number: 4666130AB
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod
- Replaces: 4897772AB, 4666130AA
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4666130AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2001 Chrysler Town & Country Piston Parts and Q&A

Q: How to Remove and Replace a Piston in an Engine on 2001 Chrysler Town & Country?
A: In order to change the piston, disconnect the battery, then take off the cylinder heads and oil pan, and ridge reamer when necessary. Take out the piston and connecting rod assembly, label it. Install new staggered-ring gaps pistons and make sure they are correctly oriented. Install connecting rod bolts, reassemble cylinder heads and pour in oil in the crankcase.