How to Service an Air Bag Control Module on 2001 Dodge Dakota?

To service the air bag Control Module disconnect the battery negative cable and wait two minutes. Remove the floor duct adapter and carpet to get at the module. Disconnect the wire harness, then install the new module in place, making sure there is a proper engagement. Finally, restore components and do not re-connect the battery until testing is complete.

OEM 2001 Dodge Dakota Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2001 Dodge Dakota Control Module Part Number: 56043252AA
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Diagnostic Module; Passenger Inflator Module; Module Air Bag Control
- Item Weight: 1.50 Pounds
- Item Dimensions: 7.2 x 6.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56043252AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Dakota Control Module Part Number: 56043138AB
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Diagnostic Module; Module Air Bag Control
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56043138AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Dakota Air Bag Control Module Parts and Q&A

Q: How to Service an Air Bag Control Module on 2001 Dodge Dakota?
A: To service the air bag Control Module disconnect the battery negative cable and wait two minutes. Remove the floor duct adapter and carpet to get at the module. Disconnect the wire harness, then install the new module in place, making sure there is a proper engagement. Finally, restore components and do not re-connect the battery until testing is complete.