How to Remove and Install a MAP Sensor on the Throttle Body on 2001 Dodge Dakota?

You'll find the MAP sensor to the side of the throttle body, linked by a rubber fitting shaped like an L. First, take off the air duct connected to the throttle body and afterwards disconnect the electrical part attached to the sensor. Then, take out the two holding bolts holding the MAP sensor and while removing it, slide the rubber fitting off of the throttle body and remove it from the sensor. Installation is done by placing the rubber L-shaped nipple onto the MAP sensor, placing the sensor over the throttle body while keeping the fitting over its vacuum nipple and fastening the sensor with the bolts, using 3 Nm torque. Once you have the sensor reset, match the electrical attachment to the unit and reinstall the duct near the throttle body.

OEM 2001 Dodge Dakota MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2001 Dodge Dakota M.A.P. Sensor Part Number: 56041018
$169.95 MSRP: $253.00
You Save: $83.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Dakota M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Dakota MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on the Throttle Body on 2001 Dodge Dakota?
A: You'll find the MAP sensor to the side of the throttle body, linked by a rubber fitting shaped like an L. First, take off the air duct connected to the throttle body and afterwards disconnect the electrical part attached to the sensor. Then, take out the two holding bolts holding the MAP sensor and while removing it, slide the rubber fitting off of the throttle body and remove it from the sensor. Installation is done by placing the rubber L-shaped nipple onto the MAP sensor, placing the sensor over the throttle body while keeping the fitting over its vacuum nipple and fastening the sensor with the bolts, using 3 Nm torque. Once you have the sensor reset, match the electrical attachment to the unit and reinstall the duct near the throttle body.