How to Service and Repair the Canister Purge Valve in the Engine Compartment on 2001 Dodge Dakota?

You should begin by unplugging both the electrical and vacuum connections on the right side of the valve. Second, unscrew the two nuts holding the support bracket and remove the valve together with the bracket. File the holes in the bracket using a drill and put the EVAP canister purge valve and mounting bracket in position before tightening the mounting nuts to 8 Nm. Lastly, join the vacuum harness back to the wiring connector.

OEM 2001 Dodge Dakota Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2001 Dodge Dakota Solenoid Valve Part Number: 4669475AB
$83.12 MSRP: $128.00
You Save: $44.88 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid - Duty Cycle Purge; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Valve; Solenoid Duty Cycle Purge; Service with Item #1; Linear Purge.
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.4 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669475AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Dakota Canister Purge Valve Parts and Q&A

Q: How to Service and Repair the Canister Purge Valve in the Engine Compartment on 2001 Dodge Dakota?
A: You should begin by unplugging both the electrical and vacuum connections on the right side of the valve. Second, unscrew the two nuts holding the support bracket and remove the valve together with the bracket. File the holes in the bracket using a drill and put the EVAP canister purge valve and mounting bracket in position before tightening the mounting nuts to 8 Nm. Lastly, join the vacuum harness back to the wiring connector.