How to Maintain the Speed Sensor on 2001 Dodge Durango?

Before you work on the Wheel Speed Sensor on a 2WD, first lift and support the vehicle. First, take out the bolt welded between the sensor and steering knuckle and remove both clamps for the sensor wire from the control arm and inner fender panel. Go under the hood, cut the sensor's wire from the harness and remove the sensor. For installation, place the sensor in the palm and tighten the bolts on the knuckle to 21 Nm (190 inch lbs.). Lock down the clamps for the sensor wire on the control arm and fender and then link the wire to the connector in the engine bay while carefully keeping it away from hot or moving underhood parts. With the steering supports still in place, make small turns to see that nothing is blocking the wire under the steering and suspension.

OEM 2001 Dodge Durango Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2001 Dodge Durango Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, Citadel, Crew, Express, Heat, R/T, SLT, SLT Plus, SXT, Special Service, Sport | 6 Cyl 3.6 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango ABS Sensor, Rear Part Number: 56028187AE
$64.56 MSRP: $96.75
You Save: $32.19 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear; Vehicle Speed Sensor; Speed Sensor; Rear Speed Sensor; Sensor Wheel Speed; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: 56028187AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028187AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Speed Sensor, Front Passenger Side Part Number: 5016338AB
$91.31 MSRP: $105.00
You Save: $13.69 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Front Right; ABS Sensor; Front Speed Sensor
- Position: Front Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.3 x 6.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016338AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Speed Sensor, Front Driver Side Part Number: 5016339AB
$103.36 MSRP: $119.00
You Save: $15.64 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Front Left; ABS Sensor; Front Speed Sensor
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.6 x 6.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016339AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Durango Speed Sensor Parts and Q&A

Q: How to Maintain the Speed Sensor on 2001 Dodge Durango?
A: Before you work on the Wheel Speed Sensor on a 2WD, first lift and support the vehicle. First, take out the bolt welded between the sensor and steering knuckle and remove both clamps for the sensor wire from the control arm and inner fender panel. Go under the hood, cut the sensor's wire from the harness and remove the sensor. For installation, place the sensor in the palm and tighten the bolts on the knuckle to 21 Nm (190 inch lbs.). Lock down the clamps for the sensor wire on the control arm and fender and then link the wire to the connector in the engine bay while carefully keeping it away from hot or moving underhood parts. With the steering supports still in place, make small turns to see that nothing is blocking the wire under the steering and suspension.