OEM 2001 Dodge Durango Vapor Canister

Fuel Vapor Canister
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

  • 2001 Dodge Durango Vapor Canister Diagram - 53030838
    View related parts

    2001 Dodge Durango Vapor Canister Part Number: 53030838

    $169.57 MSRP: $255.00
    You Save: $85.43 (34%)
    ADD TO CART
    Product Specifications
    • Other Name: Canister - Vapor; Canister Vapor
    • Item Weight: 2.10 Pounds
    • Item Dimensions: 9.5 x 6.0 x 4.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53030838
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Dodge Durango Submodels:
    • Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Durango Vapor Canister Parts and Q&A

  • Q: How to Remove and Install a Vapor Canister on 2001 Dodge Durango?
    A: The system for removing and installing the EVAP canister is not the same as for other parts because it is found below the vehicle, inside the left frame rail in front of the fuel tank. Raise the car and unhook the vacuum lines before you uninstall the canister; remember to note where the lines were so you can attach them again afterwards. Also, at this stage, take out the canister mounting nut and lift the canister clear of the mounting bracket. To install the canister, slip link the canister's locating pins into the mounting bracket grommets and screw in the mounting nut until the wrench reads 17-24 Nm (150-210 In. lbs.) At the end, put back the vacuum lines at the canister and drop the car to the ground.

Related 2001 Dodge Durango Parts