How is the MAP Sensor Installed and Serviced on the Intake Manifold on 2001 Dodge Neon?

The MAP sensor can be reached by cutting off the power supply wire, disconnecting the sensor and removing it with the special screws. Gently stick the new sensor into the manifold, avoiding damage to the O-ring seal and screw the mounting bolts in until they reach 4.5 Nm or 40 in. lbs for plastic intake manifolds before you attach the electrical connector back to the sensor.

OEM 2001 Dodge Neon MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2001 Dodge Neon M.A.P. Sensor Part Number: 4686684AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 4686684AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.0 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686684AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, R/T, SE | 1.6L L4, 2.0L L4, 4 Cyl 2.0 L GAS

2001 Dodge Neon MAP Sensor Parts and Q&A

Q: How is the MAP Sensor Installed and Serviced on the Intake Manifold on 2001 Dodge Neon?
A: The MAP sensor can be reached by cutting off the power supply wire, disconnecting the sensor and removing it with the special screws. Gently stick the new sensor into the manifold, avoiding damage to the O-ring seal and screw the mounting bolts in until they reach 4.5 Nm or 40 in. lbs for plastic intake manifolds before you attach the electrical connector back to the sensor.