How to Correctly Remove and Install a MAP Sensor on the Intake Manifold on 2002 Dodge Neon?

In order to remove the MAP sensor off the intake manifold, disconnect the electrical connector and negative battery cable and unscrew the sensor. To install, make sure that the O-ring is still intact, install the sensor, screw together to 4.5 Nm and reconnect electrical connector and battery cable.

OEM 2002 Dodge Neon MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2002 Dodge Neon M.A.P. Sensor Part Number: 4686684AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 4686684AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.0 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686684AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Neon Submodels:
- ACR, Base, ES, R/T, SE | 1.6L L4, 2.0L L4, 4 Cyl 2.0 L GAS

2002 Dodge Neon MAP Sensor Parts and Q&A

Q: How to Correctly Remove and Install a MAP Sensor on the Intake Manifold on 2002 Dodge Neon?
A: In order to remove the MAP sensor off the intake manifold, disconnect the electrical connector and negative battery cable and unscrew the sensor. To install, make sure that the O-ring is still intact, install the sensor, screw together to 4.5 Nm and reconnect electrical connector and battery cable.