JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Neon Oxygen Sensor
Oxygen O2 Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Oxygen Sensors found
2001 Dodge Neon Oxygen Sensor Part Number: 5033081AA
Product Specifications- Other Name: Sensor - Oxygen; Sensor Oxygen
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033081AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Neon Oxygen Sensor, Rear Part Number: 5033039AA
Product Specifications- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Sensor Oxygen
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.1 x 1.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033039AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Neon Oxygen Sensor, Front Part Number: 5269868AB
Product Specifications- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Sensor Oxygen
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.1 x 3.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269868AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Neon Oxygen Sensor Parts and Q&A
- Q: How to Remove and Install a Downstream Heated Oxygen Sensor on 2001 Dodge Neon?A: The heated oxygen sensor in the downstream exhaust pipe must be treated differently for both removal and re-installation. Before removing the sensor, first jack up the vehicle, unplug the electrical connector from the harness and remove the sensor's harness from the clips. An appropriate tool for removing the sensor is Snap-On tool YA8875 or any similar oxygen sensor crow foot wrench. Removed, clean the exhaust manifold with a 18 mm X 1.5 + 6E tap. When reusing the first sensor, coat the threads with an anti-seize compound such as Loctite 771-64, before installation. When installing the sensor, ensure it features a compound coating and use the same crow foot oxygen sensor wrench as before to tighten it to 28 Nm (20 ft. lbs.) Next, join the sensor electrical harness to the clips on the body and connect the electrical connector to it. Only then lower the vehicle to the ground.
Related 2001 Dodge Neon Parts
2001 Dodge Neon Camshaft Position Sensor
2001 Dodge Neon Clock Spring
2001 Dodge Neon Ignition Coil
2001 Dodge Neon Knock Sensor
2001 Dodge Neon MAP Sensor
2001 Dodge Neon Throttle Position Sensor
2001 Dodge Neon Coolant Temperature Sensor
2001 Dodge Neon Engine Control Module
2001 Dodge Neon Ignition Lock Assembly
2001 Dodge Neon Intake Manifold Temperature Sensor
2001 Dodge Neon Seat Belt
2001 Dodge Neon Transmitter