How to Correctly Remove and Install a MAP Sensor on the Intake Manifold on Dodge Neon?

You should pay close attention to taking out and fitting the MAP sensor from the intake manifold plenum. Disconnect the electrical connector, undo the screws that hold the sensor and then take the sensor out. You should also unplug the battery's negative cable before beginning the check. Put the sensor into the intake manifold, making sure the O-ring is undamaged and then tighten the screws to 4.5 Nm (40 in. lbs.) if the manifold is plastic. After the manifold is spotless, drop in the sensor, tighten the screws, plug the electrical connector back into place and then reattach the negative battery cable.

OEM Dodge Neon MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 MAP Sensors found

View related parts
Dodge Neon M.A.P. Sensor Part Number: 5033224AB
$56.38 MSRP: $81.15
You Save: $24.77 (31%)
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor Map
- Replaces: 5033224AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Neon | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Neon | R/T, SE, SXT | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Dodge Neon M.A.P. Sensor Part Number: 5293985AA
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor Map
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon M.A.P. Sensor Part Number: 5269983
Product Specifications
- Other Name: Sensor - Map; Map Sensor; Sensor Map
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995 Dodge Neon | Base, High Line, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon M.A.P. Sensor Part Number: 4686684AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 4686684AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Neon | ACR, Base, ES, R/T, SE | 1.6L L4, 2.0L L4, 4 Cyl 2.0 L GAS

Dodge Neon MAP Sensor

Choose OEM MAP Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Neon matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Neon parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In the Dodge Neon cars, the use of MAP Sensor as a crucial tool is apparent since its works by measuring the positive air pressure that gets to the intake manifold. This small device sends signals to the engine control unit (ECU), making it possible to control the fuel injectors depending on the amount of air present in the cylinders so as to ensure the right air -fuel mixture for combustion is achieved. The Dodge Neon cars that use the MAP Sensor are those that are naturally aspirated, and can be combined with the mass airflow (MAF) sensor. The MAP Sensor works on speed density principle which estimates air density in order to regulate fuel supply. Unlike boost sensors, it measures absolute pressure which makes it important for reading that are so vital for engine power, fuel consumption, and timing of ignition.

Dodge Neon MAP Sensor Parts and Q&A

M.A.P. Sensor
4686684AB
Q: How to Correctly Remove and Install a MAP Sensor on the Intake Manifold on Dodge Neon?
A:
You should pay close attention to taking out and fitting the MAP sensor from the intake manifold plenum. Disconnect the electrical connector, undo the screws that hold the sensor and then take the sensor out. You should also unplug the battery's negative cable before beginning the check. Put the sensor into the intake manifold, making sure the O-ring is undamaged and then tighten the screws to 4.5 Nm (40 in. lbs.) if the manifold is plastic. After the manifold is spotless, drop in the sensor, tighten the screws, plug the electrical connector back into place and then reattach the negative Battery Cable.