JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Neon Steering Wheel
Navigation Steering Wheel- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Steering Wheels found
2001 Dodge Neon Steering Wheel, Dark Brown Part Number: UF66WL8AA
Product Specifications- Other Name: Wheel - Steering; Wheel Steering
- Replaces: QY07WL8AC, QY07WL8AB
- Item Weight: 4.70 Pounds
- Item Dimensions: 16.1 x 15.3 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF66WL8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Neon Steering Wheel, Dark Brown Part Number: UF64WL8AA
Product Specifications- Other Name: Wheel - Steering; Wheel Steering
- Replaces: QB67WL8AC
- Item Weight: 4.80 Pounds
- Item Dimensions: 15.5 x 15.9 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF64WL8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Neon Steering Wheel, Dark Brown Part Number: UF651L8AA
Product Specifications- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 4.70 Pounds
- Item Dimensions: 15.8 x 15.8 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF651L8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Neon Steering Wheel, Dark Brown Part Number: UF671L8AA
Product Specifications- Other Name: Wheel - Steering; Wheel Steering
- Replaces: QY081L8AB, QY081L8AC
- Item Weight: 4.60 Pounds
- Item Dimensions: 15.9 x 15.6 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF671L8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Neon Steering Wheel Parts and Q&A
- Q: How to Remove and Install a Steering Wheel on 2001 Dodge Neon?A: The first step in taking off the steering wheel is to isolate the negative battery cable and wait 2 minutes after the air bag system is disabled to let the system capacitor drain. Turn the steering wheel so that your tires line up straight ahead, then twist the wheel another 180° to the right and lock it with the key from the ignition. Take out the speed control switches and unhook their wire covers or connectors, then get rid of the Driver air bag bolts from the steering wheel's back. After removing the air bag, pull out on the air bag and horn wires, then undo the screws securing the steering wheel. Use the steering wheel puller to carefully remove the wheel, increasing your grip slowly so the wires go through the holes in the column. Before installing, once more unplug and isolate the battery negative wire and wait 1 minute for the system capacitor to discharge. Check that the steering wheel is turned a half turn (180°) to the right, the column is locked and the turn signal stalk is in the center position. Place the steering wheel carefully, so the flat part of the hub lines up with the clock spring and gently pull the horn lead, air bag lead and speed control leads through the big slot. Secure the retaining screw for the steering wheel to 54.2 Nm (40 ft. lbs.) when the car is in park position, snap the squib wire into place on the air bag and then connect the horn wire. Fit two bolts and tighten them to 10 to 11 Nm (90 to 100 inch lbs.) torque, next fit the covers to the steering wheel armature or join the wire connectors to the speed control switches and mount them, using 2 Nm (20 inch lbs.) torque. Do not attach the black battery cable when the engine is running.
Related 2001 Dodge Neon Parts
2001 Dodge Neon Power Steering Pump
2001 Dodge Neon Rack And Pinion
2001 Dodge Neon Power Steering Cooler
2001 Dodge Neon Power Steering Hose
2001 Dodge Neon Steering Column
2001 Dodge Neon Steering Column Cover
2001 Dodge Neon Steering Gear Box
2001 Dodge Neon Tie Rod End