How to Remove and Install an A/C Accumulator in a Refrigerant System on 2001 Jeep Cherokee?

To remove the accumulator, the battery negative cable is disconnected and the refrigerant is recovered. Unplug the low pressure cycling clutch switch, loosen the accumulator retaining band and unplug the suction line. Take out the accumulator, and then install the new one, reconnecting all lines and the battery. Replace 120 milliliters of recommended refrigerant oil.

OEM 2001 Jeep Cherokee A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Accumulators found

View related parts
2001 Jeep Cherokee Drier Part Number: 55037569AC
Product Specifications
- Other Name: Drier - A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Accumulator
- Replaces: 55037569AB
- Item Weight: 2.10 Pounds
- Item Dimensions: 9.4 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037569AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Cherokee Accumulator Part Number: 55036649AF
Product Specifications
- Other Name: Drier - A/C; A/C Receiver Drier; A/C Accumulator
- Replaces: 55036649AE
- Item Weight: 3.90 Pounds
- Item Dimensions: 49.4 x 49.0 x 33.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55036649AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 6 Cyl 4.0 L GAS

2001 Jeep Cherokee A/C Accumulator Parts and Q&A

Q: How to Remove and Install an A/C Accumulator in a Refrigerant System on 2001 Jeep Cherokee?
A: To remove the accumulator, the battery negative cable is disconnected and the refrigerant is recovered. Unplug the low pressure cycling clutch switch, loosen the accumulator retaining band and unplug the suction line. Take out the accumulator, and then install the new one, reconnecting all lines and the battery. Replace 120 milliliters of recommended refrigerant oil.