Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Jeep Wrangler Brake Light Switch

Brake Lamp Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

  • 2001 Jeep Wrangler Brake Light Switch - 4671336AD
    2001 Jeep Wrangler Brake Light Switch - 4671336AD
    2001 Jeep Wrangler Brake Light Switch - 4671336AD
    2001 Jeep Wrangler Brake Light Switch - 4671336AD
    2001 Jeep Wrangler Brake Light Switch - 4671336AD
    2001 Jeep Wrangler Brake Light Switch Diagram - 4671336AD
    View related parts

    2001 Jeep Wrangler Brake Switch Part Number: 4671336AD

    $39.68 MSRP: $53.75
    You Save: $14.07 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
    • Replaces: 4671336, 4671336AC, 4671336AB
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.6 x 2.0 x 3.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4671336AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Rubicon, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Wrangler Brake Light Switch Parts and Q&A

  • Q: How to Service and Repair a Brake Light Switch on 2001 Jeep Wrangler?
    A: In order to repair or replace the brake light switch, you may have to remove the steering column cover, along with the lower trim panel. Use the brake pedal to ground the brakes, rotate the switch past 299 degrees counterclockwise and slide the switch out of the bracket, making sure all the way out. Unplug the switch harness and take out the switch. When installing, pull the plunger until it is at its farthest and link the wires from the harness to the switch. Apply the brake and, holding the pedal, move the tab on the switch into the notch of the switch bracket, insert the switch and turn it slowly by about a half turn to lock it down. Take your foot off the brake, then pull the pedal completely toward the back; this sets the plunger right, as you hear a ratcheting sound as it adjusts automatically by slotting into the switch.

Related 2001 Jeep Wrangler Parts

Alternate Year Models

+
2000 Jeep Wrangler Brake Light Switch 2002 Jeep Wrangler Brake Light Switch