Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Jeep Wrangler Neutral Safety Switch

Transmission Neutral Safety Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Neutral Safety Switches found

  • 2001 Jeep Wrangler Neutral Safety Switch - 56028181AC
    2001 Jeep Wrangler Neutral Safety Switch - 56028181AC
    2001 Jeep Wrangler Neutral Safety Switch Diagram - 56028181AC
    View related parts

    2001 Jeep Wrangler Neutral Safety Switch Part Number: 56028181AC

    Product Specifications
    • Other Name: Switch - Neutral, Safety, Back Up
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.9 x 2.6 x 3.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 56028181AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Jeep Wrangler Submodels:
    • SE, Sahara, Sport, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
  • 2001 Jeep Wrangler Neutral Safety Switch - 4882173
    2001 Jeep Wrangler Neutral Safety Switch Diagram - 4882173
    View related parts

    2001 Jeep Wrangler Neutral Safety Switch Part Number: 4882173

    Product Specifications
    • Other Name: Switch - Neutral, Safety, Back Up; Switch Neutral Safety, Back Up
    • Item Weight: 1.10 Pounds
    • Item Dimensions: 13.4 x 4.6 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4882173
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Jeep Wrangler Submodels:
    • SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Wrangler Neutral Safety Switch Parts and Q&A

  • Q: How to Service and Repair a Neutral Safety Switch in a 32RH Automatic Transmission on 2001 Jeep Wrangler?
    A: Before you begin repairing the Neutral Safety Switch for the 32Rh Automatic Transmission, lift the vehicle and put a drain pan beneath the switch. Release the wiring from the switch and remove the device from the control unit. Before installing, place the shift lever in both Park and Neutral and make sure the switch operating lever fingers are centered in the hole on the case. Fit a new seal to the switch and correctly place it in the case, fixing it with 34 Nm (25 ft. lbs.) of tightening basic force. Test the new switch with a 12V test lamp, put the switch wires back in place and remove the jack. Once done, top off the transmission fluid so it's midway up the "hot" mark.

Related 2001 Jeep Wrangler Parts

Alternate Year Models

+
2000 Jeep Wrangler Neutral Safety Switch 2002 Jeep Wrangler Neutral Safety Switch