Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Jeep Wrangler Brake Light Switch

Brake Lamp Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

  • 2002 Jeep Wrangler Brake Light Switch - 4671336AD
    2002 Jeep Wrangler Brake Light Switch - 4671336AD
    2002 Jeep Wrangler Brake Light Switch - 4671336AD
    2002 Jeep Wrangler Brake Light Switch - 4671336AD
    2002 Jeep Wrangler Brake Light Switch - 4671336AD
    2002 Jeep Wrangler Brake Light Switch Diagram - 4671336AD
    View related parts

    2002 Jeep Wrangler Brake Switch Part Number: 4671336AD

    $39.68 MSRP: $53.75
    You Save: $14.07 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
    • Replaces: 4671336, 4671336AC, 4671336AB
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.6 x 2.0 x 3.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4671336AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Rubicon, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler Brake Light Switch Parts and Q&A

  • Q: How to Service and Repair a Brake Light Switch on 2002 Jeep Wrangler?
    A: Before repairing or servicing the brake light switch, take off the steering column cover and the lower trim panel. First press the brake pedal firmly to the ground, then move the switch 300 degrees counterclockwise and pull it straight backward out of its bracket. Eliminate the connection between the switch harness and the switch by removing the switch. For installation, fully extend the plunger and then connect the harness connector with the switch. After putting the brake pedal down, adjust the switch tab so it's even with the notch in the bracket, push the switch into the bracket and turn it right until it clicks into place. Take your foot off the brake pedal and push it all the way to the rear to let the plunger fall into place in the switch body.

Related 2002 Jeep Wrangler Parts

Alternate Year Models

+
2001 Jeep Wrangler Brake Light Switch 2003 Jeep Wrangler Brake Light Switch