Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Jeep Wrangler Brake Light Switch

Brake Lamp Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

  • 2000 Jeep Wrangler Brake Light Switch - 4671336AD
    2000 Jeep Wrangler Brake Light Switch - 4671336AD
    2000 Jeep Wrangler Brake Light Switch - 4671336AD
    2000 Jeep Wrangler Brake Light Switch - 4671336AD
    2000 Jeep Wrangler Brake Light Switch - 4671336AD
    2000 Jeep Wrangler Brake Light Switch Diagram - 4671336AD
    View related parts

    2000 Jeep Wrangler Brake Switch Part Number: 4671336AD

    $39.68 MSRP: $53.75
    You Save: $14.07 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
    • Replaces: 4671336, 4671336AC, 4671336AB
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.6 x 2.0 x 3.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4671336AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Rubicon, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Wrangler Brake Light Switch Parts and Q&A

  • Q: How to Service and Repair a Brake Light Switch on 2000 Jeep Wrangler?
    A: You will need to take off the steering column cover and lower trim panel to reach the brake light switch for service or repair. Firmly press the brake pedal as far as possible, move the switch counterclockwise by about 30° to release it and pull it back and out of the bracket. Release the switch harness and take out the switch. Pull the plunger of the switch completely out and then connect the switch's wires to the harness' wires. With the brake pedal held all the way down, match the tab on the switch with the notch in the switch bracket, put the switch in the bracket and turn it clockwise around 30° until it locks. Take your foot from the brake pedal and, at the same time, push it toward the rear of the car. This will help the plunger settle as it self-adjusts and creates a ratcheting sound within the switch as you do so.

Related 2000 Jeep Wrangler Parts

Alternate Year Models

+
1999 Jeep Wrangler Brake Light Switch 2001 Jeep Wrangler Brake Light Switch