How to Service a Power Steering Gear Seal on the Pitman Shaft on 2001 Jeep Wrangler?

To service the pitman shaft seal, clean the shaft and housing, remove the preload adjuster nut, and center the stub shaft. Remove the side cover and pitman shaft assembly. Replace the dust seal, retaining ring, and bearings. Install new seals and O-rings, then reassemble and tighten cover bolts to 62 Nm.

OEM 2001 Jeep Wrangler Power Steering Gear Seal

Steering Gear Seals

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Gear Seals found

View related parts
2001 Jeep Wrangler Seal Kit, Front Part Number: 4470365
Product Specifications
- Other Name: Seal - Steering Gear Pitman Shaft; Steering Gear Rebuild Kit, Front; Steering Gear Seal Kit; Power Steering Rebuild Kit; Pitman Shaft Seal; Seal Kit Steering Gear Pitman Shaft; Seal Package, Pitman Shaft Seal; Seal Package, Pitman Shaft
- Position: Front
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.6 x 8.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4470365
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- SE, Sahara, Sport, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Wrangler Gear Set Part Number: 3893557
Product Specifications
- Other Name: Seal - Steering Gear End Plug; Power Steering Rebuild Kit; Steering Gear Seal Kit; Seal Kit; Overhaul Kit; Steering Gear End Plug Seal; Nut, Steering Gear Arm; Power Steering Gear.
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 3.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3893557
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- SE, Sahara, Sport, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Wrangler Seal Kit Part Number: 3893558
Product Specifications
- Other Name: Seal - Steering Gear Cover; Steering Gear Input Shaft Seal; Power Steering Rebuild Kit; Steering Gear Seal Kit; Cover Gasket; Overhaul Kit; Seal Package; Steering Gear Housing Side Cover Seal; Nut, Steering Gear Arm.
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.3 x 6.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3893558
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- SE, Sahara, Sport, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Wrangler Power Steering Gear Seal Parts and Q&A

Q: How to Service a Power Steering Gear Seal on the Pitman Shaft on 2001 Jeep Wrangler?
A: To service the pitman shaft seal, clean the shaft and housing, remove the preload adjuster nut, and center the stub shaft. Remove the side cover and pitman shaft assembly. Replace the dust seal, retaining ring, and bearings. Install new seals and O-rings, then reassemble and tighten cover bolts to 62 Nm.