Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Jeep Wrangler Power Steering Pump

Power Steering Pump Unit
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

  • 2001 Jeep Wrangler Power Steering Pump - 52088018
    2001 Jeep Wrangler Power Steering Pump Diagram - 52088018
    View related parts

    2001 Jeep Wrangler Power Steering Pump Part Number: 52088018

    Product Specifications
    • Other Name: Pump - Power Steering; Pump Power Steering
    • Item Weight: 5.10 Pounds
    • Item Dimensions: 7.4 x 5.3 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52088018
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Jeep Wrangler Submodels:
    • SE | 4 Cyl 2.5 L GAS
  • 2001 Jeep Wrangler Power Steering Pump - RL087871AE
    2001 Jeep Wrangler Power Steering Pump Diagram - RL087871AE
    View related parts

    2001 Jeep Wrangler Power Steering Pump Part Number: RL087871AE

    Product Specifications
    • Other Name: Pump - Power Steering
    • Replaces: 52087871AE, 52087871AD
    • Item Weight: 6.60 Pounds
    • Item Dimensions: 14.1 x 12.4 x 6.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: RL087871AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS

2001 Jeep Wrangler Power Steering Pump Parts and Q&A

  • Q: How to Service a Power Steering Pump on 2001 Jeep Wrangler?
    A: You should first remove the serpentine belt, unhook the hoses from the pump and empty it before you begin work. After that, undo the three pump mounting bolts by going through the holes in the pump pulleys. Tip the pump down so you can remove it from the engine and then take the pulley off of the pump. Installation should start with adding the pulley to the pump and then putting the pump onto the engine bracket. Adjust the bolt on the pump bracket to 47 Nm and fill each of the three pump mounting bolts to a pressure of 27 Nm. Be sure to attach the pressure line to the pump and tighten it with 28 Nm (21 ft. lbs.) of force, only after that, link the return hoses. Now, add the drive belt, top off the power steering fluid and do the initial run of the power steering pump.

Related 2001 Jeep Wrangler Parts

Alternate Year Models

+
2000 Jeep Wrangler Power Steering Pump 2002 Jeep Wrangler Power Steering Pump