How Does a Distributor Get Removed and Installed on 2002 Dodge Dakota?

To remove the distributor, remove the negative battery cable and air cleaner assembly. Mark the position of the distributor, make sure that the number one cylinder is at TDC, and align the rotor. Remove the distributor, clean the block and fit in the block considering alignment. Diagrammatically check the position using a scan tool and reinstall the air cleaner.

OEM 2002 Dodge Dakota Distributor

Ignition Distributor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Distributors found

View related parts
2002 Dodge Dakota Distributor Assembly Part Number: 4740339AB
Product Specifications
- Other Name: Distributor - Engine; Distributor; Distributor Engine
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.8 x 5.2 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4740339AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Dakota Submodels:
- Base, LE, R/T, S, SLT, Sport, WS | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Dakota Distributor Assembly Part Number: 4740338AB
$218.67 MSRP: $322.00
You Save: $103.33 (33%)
Product Specifications
- Other Name: Distributor - Engine; Distributor; Distributor Engine
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.8 x 5.0 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4740338AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Dakota Submodels:
- Base, LE, S, SLT, SXT, Sport, WS | 6 Cyl 3.9 L GAS

2002 Dodge Dakota Distributor Parts and Q&A

Q: How Does a Distributor Get Removed and Installed on 2002 Dodge Dakota?
A: To remove the distributor, remove the negative battery cable and air cleaner assembly. Mark the position of the distributor, make sure that the number one cylinder is at TDC, and align the rotor. Remove the distributor, clean the block and fit in the block considering alignment. Diagrammatically check the position using a scan tool and reinstall the air cleaner.