How to Service and Repair a Crankshaft Seal on 2002 Dodge Intrepid?

First, take out the transaxle from the vehicle and afterward remove the drive plate to service and repair the crankshaft main bearing seal. Slowly use a 3/16" wide flat bladed screwdriver to separate the seal from the metal case of the crankshaft seal by prying against it without letting the blade touch the seal. Keeping contact with the chamfer is fine. After checking for any burrs, remove scratches from the crankshaft edge and clean the area gently with 400 grit sandpaper. After that, place Guide 6926-1 over the crankshaft and check that its magnetic base is correctly positioned as a pilot tool. Set the seal above the pilot tool, so the seal's lip points to the crankshaft, while leaving the pilot tool on the crankshaft. After that, use Special Tool 6926-2 Installer and C-4171 Handle to push the seal into the retainer housing until it is even with the housing top and then put back the drive plate and transaxle.

OEM 2002 Dodge Intrepid Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshaft Seals found

View related parts
2002 Dodge Intrepid Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 3.2L V6, 3.5L V6, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2002 Dodge Intrepid Front Crank Seal Part Number: 4663618
$20.20 MSRP: $29.95
You Save: $9.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Engine Timing Cover Seal; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Oil Front; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663618
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2002 Dodge Intrepid Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 4.7 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2002 Dodge Intrepid Rear Main Seal Retainer Part Number: 4663622
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663622
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2002 Dodge Intrepid Rear Main Seal Part Number: 4663870
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer Crankshaft Rear Oil Seal See Note; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663870
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2002 Dodge Intrepid Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2002 Dodge Intrepid?
A: First, take out the transaxle from the vehicle and afterward remove the drive plate to service and repair the crankshaft main bearing seal. Slowly use a 3/16" wide flat bladed screwdriver to separate the seal from the metal case of the crankshaft seal by prying against it without letting the blade touch the seal. Keeping contact with the chamfer is fine. After checking for any burrs, remove scratches from the crankshaft edge and clean the area gently with 400 grit sandpaper. After that, place Guide 6926-1 over the crankshaft and check that its magnetic base is correctly positioned as a pilot tool. Set the seal above the pilot tool, so the seal's lip points to the crankshaft, while leaving the pilot tool on the crankshaft. After that, use Special Tool 6926-2 Installer and C-4171 Handle to push the seal into the retainer housing until it is even with the housing top and then put back the drive plate and transaxle.