How to Service and Repair a Crankshaft Seal on 2003 Dodge Intrepid?

Start by removing the transaxle from the car and after that, remove the drive plate. Use a 3/16" flat bladed screwdriver to help you insert between the lip and the crankshaft metal case, angling it against the edge to remove the seal without letting the blade touch the seal surface, but you may touch the crankshaft edge. Do a final check for scratches on the crankshaft edge; in case you find some, clean them off with 400 grit sandpaper so they don't harm the sealant during installation. After that, put Special Tool 6926-1 Guide on the crankshaft and ensure it lines up with the crankshaft, using the magnetic base as a pilot. Always keep the pilot tool installed on the crankshaft and place the seal over the pilot tool so the seal's lip points towards the crankshaft. Then, using both C-4171 Handle and Special Tool 6926-2 Installer, drive the seal into the housing until it is flush with the surface. Following that, reattach the drive plate and transaxle.

OEM 2003 Dodge Intrepid Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshaft Seals found

View related parts
2003 Dodge Intrepid Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 3.2L V6, 3.5L V6, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Dodge Intrepid Front Crank Seal Part Number: 4663618
$20.20 MSRP: $29.95
You Save: $9.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Engine Timing Cover Seal; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Oil Front; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663618
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2003 Dodge Intrepid Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 4.7 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Dodge Intrepid Rear Main Seal Retainer Part Number: 4663622
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663622
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2003 Dodge Intrepid Rear Main Seal Part Number: 4663870
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer Crankshaft Rear Oil Seal See Note; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663870
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2003 Dodge Intrepid Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2003 Dodge Intrepid?
A: Start by removing the transaxle from the car and after that, remove the drive plate. Use a 3/16" flat bladed screwdriver to help you insert between the lip and the crankshaft metal case, angling it against the edge to remove the seal without letting the blade touch the seal surface, but you may touch the crankshaft edge. Do a final check for scratches on the crankshaft edge; in case you find some, clean them off with 400 grit sandpaper so they don't harm the sealant during installation. After that, put Special Tool 6926-1 Guide on the crankshaft and ensure it lines up with the crankshaft, using the magnetic base as a pilot. Always keep the pilot tool installed on the crankshaft and place the seal over the pilot tool so the seal's lip points towards the crankshaft. Then, using both C-4171 Handle and Special Tool 6926-2 Installer, drive the seal into the housing until it is flush with the surface. Following that, reattach the drive plate and transaxle.