How to Service the Control Arm in the Upper Suspension on 2002 Dodge Ram 3500?

To work on the upper control arm, first lift and support your car, take off the tire and then remove the wheel. With a jack stand, hold up the outboard end of the lower suspension arm. After that, take out the upper ball joint's cotter pin and nut, then use remover MB-990635 to separate the ball joint and the knuckle. Eliminate the bolts from the upper suspension arm bracket connected to the pivot bar and remove the arm from the vehicle. To set it up, place the upper suspension arm on the holder and insert and tighten the bolts holding the pivot bar to 169 Nm (125 ft. lbs.). Set the ball joint in the knuckle, tighten the nut to 81 Nm (60 ft. lbs.) and use a new cotter pin. Take the jack out of the lower suspension arm, fix the tire and wheel assembly, remove the support and bring the car down again. The final step is to synchronize your car's front suspension.

OEM 2002 Dodge Ram 3500 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
2002 Dodge Ram 3500 Upper Control Arm Part Number: 52106799AA
$170.42 MSRP: $216.04
You Save: $45.62 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Control; Suspension Control Arm; Control Arm; Upper Arm; Arm Control
- Item Weight: 5.40 Pounds
- Item Dimensions: 2.4 x 2.9 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106799AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Ram 3500 Lower Control Arm Part Number: 52113678AA
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm; Arm Lower Control Front
- Position: Lower
- Item Weight: 32.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Ram 3500 Lower Control Arm Part Number: 52106778AA
Product Specifications
- Other Name: Arm - Control; Suspension Control Arm; Control Arm; Lower Arm; Arm Control
- Item Weight: 6.50 Pounds
- Item Dimensions: 2.7 x 3.4 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106778AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Ram 3500 Upper Control Arm Part Number: 52106678AA
Product Specifications
- Other Name: Arm - Upper Control; Suspension Control Arm and Ball Joint Assembly.; Arm Upper Control Front
- Position: Upper
- Item Weight: 11.70 Pounds
- Item Dimensions: 16.9 x 15.0 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52106678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2002 Dodge Ram 3500 Control Arm Parts and Q&A

Q: How to Service the Control Arm in the Upper Suspension on 2002 Dodge Ram 3500?
A: To work on the upper control arm, first lift and support your car, take off the tire and then remove the wheel. With a jack stand, hold up the outboard end of the lower suspension arm. After that, take out the upper ball joint's cotter pin and nut, then use remover MB-990635 to separate the ball joint and the knuckle. Eliminate the bolts from the upper suspension arm bracket connected to the pivot bar and remove the arm from the vehicle. To set it up, place the upper suspension arm on the holder and insert and tighten the bolts holding the pivot bar to 169 Nm (125 ft. lbs.). Set the ball joint in the knuckle, tighten the nut to 81 Nm (60 ft. lbs.) and use a new cotter pin. Take the jack out of the lower suspension arm, fix the tire and wheel assembly, remove the support and bring the car down again. The final step is to synchronize your car's front suspension.