How to Properly Bleed a Brake Master Cylinder Before Installation on 2002 Jeep Liberty?

To correctly bleed a new brake master cylinder before installing, you need some tools, bleed tubes, a wooden dowel to move the piston and brake line that you can use to create bleed tubes. Set the brake master cylinder into a vise and connect both bleed tubes to the outlet ports, letting the end of each tube dip into the reservoir. Brake fluid should first be added, then the wood dowel is used to press the cylinder pistons down and free them again. Go on with the process until you can't see any air bubbles in the fluid.

OEM 2002 Jeep Liberty Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2002 Jeep Liberty Master Cylinder Part Number: 5072526AB
$206.17 MSRP: $428.00
You Save: $221.83 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.0 x 7.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5072526AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2002 Jeep Liberty Brake Master Cylinder Parts and Q&A

Q: How to Properly Bleed a Brake Master Cylinder Before Installation on 2002 Jeep Liberty?
A: To correctly bleed a new brake master cylinder before installing, you need some tools, bleed tubes, a wooden dowel to move the piston and brake line that you can use to create bleed tubes. Set the brake master cylinder into a vise and connect both bleed tubes to the outlet ports, letting the end of each tube dip into the reservoir. Brake fluid should first be added, then the wood dowel is used to press the cylinder pistons down and free them again. Go on with the process until you can't see any air bubbles in the fluid.