How to Properly Bleed a Brake Master Cylinder on 2003 Jeep Liberty?

Installation of a new brake master cylinder should be preceded by bleeding it out with bleed tubes and a plain dowel to activate the pistons. Grasp the brake master cylinder in a vise and pair the open ends of the bleed tubes with each outlet port on the cylinder, immersing the tube ends into the reservoir. Put in brake fluid after the reservoir is clean, then push each cylinder piston in using the wood dowel and then release them to allow them to come back up. Constantly mix the fluid until there are no bubbles left within it.

OEM 2003 Jeep Liberty Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2003 Jeep Liberty Master Cylinder Part Number: 5072526AB
$206.17 MSRP: $428.00
You Save: $221.83 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.0 x 7.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5072526AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2003 Jeep Liberty Brake Master Cylinder Parts and Q&A

Q: How to Properly Bleed a Brake Master Cylinder on 2003 Jeep Liberty?
A: Installation of a new brake master cylinder should be preceded by bleeding it out with bleed tubes and a plain dowel to activate the pistons. Grasp the brake master cylinder in a vise and pair the open ends of the bleed tubes with each outlet port on the cylinder, immersing the tube ends into the reservoir. Put in brake fluid after the reservoir is clean, then push each cylinder piston in using the wood dowel and then release them to allow them to come back up. Constantly mix the fluid until there are no bubbles left within it.