How to Service an Oil Filter on 2002 Jeep Liberty?

In order to service the oil filter, lift the vehicle and an oil container should be placed below it. A filter is removed counterclockwise using a filter wrench. Wipe the mounting surface, apply engine oil to the new gasket and replace the filter until the gasket is in contact with the base, tightening it to 21 Nm (15 ft. lbs.).

OEM 2002 Jeep Liberty Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2002 Jeep Liberty Oil Filter Part Number: 4105409AE
$7.96 MSRP: $12.00
You Save: $4.04 (34%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Filter
- Replaces: 4105409AB, 4105409BB, FE00215, 4105409AC, 4105409
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4105409AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Jeep Liberty Submodels:
- Sport | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2002 Jeep Liberty Oil Filter Part Number: 4781452BF
$14.57
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 4781452BB, 4781452BA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781452BF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS

2002 Jeep Liberty Oil Filter Parts and Q&A

Q: How to Service an Oil Filter on 2002 Jeep Liberty?
A: In order to service the oil filter, lift the vehicle and an oil container should be placed below it. A filter is removed counterclockwise using a filter wrench. Wipe the mounting surface, apply engine oil to the new gasket and replace the filter until the gasket is in contact with the base, tightening it to 21 Nm (15 ft. lbs.).