How to Replace an Oil Filter on 2003 Jeep Liberty?

To service the oil filter, raise the vehicle and place a container of oil under it. Use a filter wrench to remove the filter in a counterclockwise direction. Clean the mounting surface, lubricate the new gasket with engine oil and install the filter until the gasket is in contact with the base, tightening to 21 Nm (15 ft. lbs.).

OEM 2003 Jeep Liberty Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2003 Jeep Liberty Oil Filter Part Number: 4105409AE
$7.96 MSRP: $12.00
You Save: $4.04 (34%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Filter
- Replaces: 4105409AB, 4105409BB, FE00215, 4105409AC, 4105409
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4105409AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Jeep Liberty Submodels:
- Sport | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2003 Jeep Liberty Oil Filter Part Number: 4781452BF
$14.57
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 4781452BB, 4781452BA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781452BF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS

2003 Jeep Liberty Oil Filter Parts and Q&A

Q: How to Replace an Oil Filter on 2003 Jeep Liberty?
A: To service the oil filter, raise the vehicle and place a container of oil under it. Use a filter wrench to remove the filter in a counterclockwise direction. Clean the mounting surface, lubricate the new gasket with engine oil and install the filter until the gasket is in contact with the base, tightening to 21 Nm (15 ft. lbs.).