How to Service an Oil Filter on Jeep Liberty?

First, raise the car on a hoist, find the oil filter under the car and set the container directly below to receive the old oil. During service, always keep the strap to the front rim from the remove/install tool against the can to base lock seam on the base plate. Turn the oil filter counterclockwise with the wrench to get it off. To instal the filter, dust off and check the mounting sides to avoid unevenness or obstructions. Oil the new oil filter gasket with clean engine oil, then fit the oil filter onto the base, ensuring the gasket touches it and tighten it to 21 Nm (15 ft. lbs.).

How to Change an Oil Filter on Jeep Liberty?

Service the engine oil filter by first getting your vehicle up on a hoist and putting a container below where the filter is located. Be sure to place the tool band strap against the base lock seam where it meets the reinforced base plate when removing the filter can. Take off the oil filter by rotating it counterclockwise using the right wrench. Prior to installation, make sure the mounting surface for the filter is clear, straight and free of any parts that may have come from the gasket. Dab some clean oil on the filter gasket and then tighten the filter down until the base and gasket are touching, tightening to a torque of 21 Nm (15 ft. lbs.).

OEM Jeep Liberty Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Filters found

View related parts
Jeep Liberty Oil Filter Part Number: 4105409AE
$7.96 MSRP: $12.00
You Save: $4.04 (34%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Filter
- Replaces: 4105409AB, 4105409BB, FE00215, 4105409AC, 4105409
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Sport | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Oil Filter Part Number: 5184231AB
$7.66 MSRP: $11.25
You Save: $3.59 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 5184231AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Oil Filter Part Number: 4781452BF
$14.57
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 4781452BB, 4781452BA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2008 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Oil Filter Part Number: 5003558AB
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 5003558AA, 68052142AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Jeep Liberty | Limited, Sport | 2.8L L4, 4 Cyl 2.8 L DIESEL

Jeep Liberty Oil Filter

Choose OEM Oil Filter that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Oil Filter follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Oil Filter in Jeep Liberty is responsible for ensuring that the motor oil stays clean from contaminants with an aim of protecting the health of the motor. It works in a way that only allows dirt particles to be stopped while oil is allowed to pass and provide the necessary lubrication and protection from wear as well as the formation of sludge. Jeep Liberty models employ both replaceable element cartridge filters and more conventional spin-on filters, the latter is accommodated in a rather substantial metal enclosure which is required to resist high oil pressure and frequent engine vibrations. In the course of this model's production, Jeep Liberty experienced alterations in its Oil Filter such as the standard and the performance filters. Standard used filters may not suffice the need of high performance engines since they need stronger and better filters in terms of ability to filter more. Dual layer spin-on filters built for high heat environments have greater wall thickness of the canister, and better synthetic material that can capture up to 99% of the dirt while maintaining high oil flow. Thus, the change in this aspect of Oil Filter is important for elongating Jeep Liberty vehicle's engines and their efficacy.

Jeep Liberty Oil Filter Parts and Q&A

Oil Filter
4105409AE
Q: How to Service an Oil Filter on Jeep Liberty?
A:
First, raise the car on a hoist, find the oil filter under the car and set the container directly below to receive the old oil. During service, always keep the strap to the front rim from the remove/install tool against the can to base lock seam on the base plate. Turn the oil filter counterclockwise with the wrench to get it off. To instal the filter, dust off and check the mounting sides to avoid unevenness or obstructions. Oil the new oil filter gasket with clean engine oil, then fit the oil filter onto the base, ensuring the gasket touches it and tighten it to 21 Nm (15 ft. lbs.).
Oil Filter
4781452BF
Q: How to Change an Oil Filter on Jeep Liberty?
A:
Service the engine oil filter by first getting your vehicle up on a hoist and putting a container below where the filter is located. Be sure to place the tool band strap against the base lock seam where it meets the reinforced base plate when removing the filter can. Take off the oil filter by rotating it counterclockwise using the right wrench. Prior to installation, make sure the mounting surface for the filter is clear, straight and free of any parts that may have come from the gasket. Dab some clean oil on the filter gasket and then tighten the filter down until the base and gasket are touching, tightening to a torque of 21 Nm (15 ft. lbs.).