How to Safely Service and Replace a Blower Motor Resistor for Rear on 2003 Chrysler Voyager?

If the blower motor was used before, leave the resistor alone for five minutes to allow it to cool. Separate the black cable that's attached to the battery. Take off the right quarter trim panel and the right D-pillar trim panel from the quarter inner panel. Remove the rear HVAC wire harness connector from the blower motor resistor. Unscrew the two holders for the blower motor resistor on the rear heater-A/C unit housing and remove the resistor from inside. Set the new blower motor resistor inside the rear heater-A/C unit housing and attach it with the two screws, making sure they are tightened to 2 Nm (17 in. lbs.). Hook back up the rear HVAC wire harness connector to the resistor, secure the right quarter trim panel and right D-pillar trim panel and put the negative battery cable back in once more.

OEM 2003 Chrysler Voyager Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2003 Chrysler Voyager Resistor Part Number: 68029175AA
$25.20 MSRP: $37.25
You Save: $12.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Blower Motor Resistor
- Replaces: 4885583AB, 4885583AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68029175AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
- Base, Ec, LX | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2003 Chrysler Voyager Resistor Part Number: 5019189AA
$75.86 MSRP: $96.17
You Save: $20.31 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; Blower Motor Resistor; Resistor Blower Motor
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 4.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019189AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2003 Chrysler Voyager Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885482AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2003 Chrysler Voyager Blower Motor Resistor Parts and Q&A

Q: How to Safely Service and Replace a Blower Motor Resistor for Rear on 2003 Chrysler Voyager?
A: If the blower motor was used before, leave the resistor alone for five minutes to allow it to cool. Separate the black cable that's attached to the battery. Take off the right quarter trim panel and the right D-pillar trim panel from the quarter inner panel. Remove the rear HVAC wire harness connector from the blower motor resistor. Unscrew the two holders for the blower motor resistor on the rear heater-A/C unit housing and remove the resistor from inside. Set the new blower motor resistor inside the rear heater-A/C unit housing and attach it with the two screws, making sure they are tightened to 2 Nm (17 in. lbs.). Hook back up the rear HVAC wire harness connector to the resistor, secure the right quarter trim panel and right D-pillar trim panel and put the negative battery cable back in once more.