How to Safely Service and Replace a Blower Motor Resistor for Rear on Chrysler Voyager?

Before you work on the blower motor resistor, give it five minutes to cool if the motor has been on. Warn yourself and unplug the negative line of the battery. You should first remove the quarter inner panel's right quarter trim panel and right D-pillar trim panel. Disconnect the rear HVAC wire harness connector from the end of the resistor connector receptacle. Loosen the two screws attaching the blower motor resistor to the rea heater-A/C unit housing, then pull out the resistor. To fix the new blower motor resistor, screw it into the rear heater-A/C unit housing and tighten the screws to 2 Nm (17 in. lbs.). Reattach the rear HVAC's wire harness connector to the resistor connector receptacle, put in the right quarter and D-pillar trim panels and then link the negative battery cable again.

How to Safely Service and Replace a Blower Motor Resistor for Front on Chrysler Voyager?

To service the blower motor resistor, first unhook and isolate the air bag system's negative battery cable and allow two minutes for the air bag system capacitor to stop working. Turn the blower motor resistor off for around five minutes if the blower motor was on, as it can easily heat up. Without the resistor hooked up, do not start the blower motor or harm to your vehicle may occur. Fold both sides of the glove box inward by opening it and pulling them down. To reach the blower motor resistor, detach the package of wires coming from the instrument panel and from the blower motor, both from the resistor's connector. Open the blower motor resistor by unscrewing its two screws and then remove the resistor. Set the new resistor in the blower motor's housing and use two of the screws to hold it there, turning each screw up to 2 Nm (17 in. lbs.). Connect the blower motor pigtail wire to the back of the dashboard and the blower motor wiring harness wire to the connector opposite of the blower motor. Pull on the glove box grip again to lift the bin up, close and lock the glove box and finish with the negative battery cable.

OEM Chrysler Voyager Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blower Motor Resistors found

View related parts
Chrysler Voyager Blower Motor Resistor, Rear Part Number: 68379071AA
$124.65 MSRP: $185.00
You Save: $60.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front & Rear.; Control Module; Fan Resistor; Module; Resistor; Module Power Blower Motor
- Position: Rear
- Replaces: 68079480AA, 68110616AB, 68029736AA, 68433698AA, 68110616AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Resistor Part Number: 68029175AA
$25.20 MSRP: $37.25
You Save: $12.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Blower Motor Resistor
- Replaces: 4885583AB, 4885583AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Resistor Part Number: 5019189AA
$75.86 MSRP: $96.17
You Save: $20.31 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; Blower Motor Resistor; Resistor Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Resistor Part Number: 4677180AD
$27.75 MSRP: $36.00
You Save: $8.25 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; Resistor Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Voyager Blower Motor Resistor is one of the important parts that squarely increase the performance and functionality of the climate control system of the vehicle. One of the most reliable and ECM, this Blower Motor Resistor controls the blower motor speed for proper delivery of hot or cool air inside the cabin. This feature enables passengers to comfortably travel in the Chrysler Voyager especially for families and other people of all ages. Well, in this connection, it is possible to note that Blower Motor Resistor can be used with the different Voyager models and, at the same time, it features high efficiency because it is compatible with other systems due to its versatile design. This, in conjunction with the featured ability to control the electrical resistance allows for an autonomously controllable climate, which not only improves on the comfort of the car's environment but also helps safe driving through effective defrosting. Chrysler Voyager Blower Motor Resistor can be recommended for automotive business entrepreneurs as it has been built with strong material and it is also tested to work for several years without developing any mechanical problems. The Chrysler Voyager as a product that has been sold for over twelve million units speaks a lot about its quality and the Blower Motor Resistor contributes to this aspect in a great way. As a result, focusing on the optimization of the efficiency and the safety of passengers, Chrysler Voyager Blower Motor Resistor is still an essential component that decides the quality of the car trip.

Chrysler Voyager Blower Motor Resistor Parts and Q&A

Resistor
5019189AA
Q: How to Safely Service and Replace a Blower Motor Resistor for Rear on Chrysler Voyager?
A:
Before you work on the blower motor resistor, give it five minutes to cool if the motor has been on. Warn yourself and unplug the negative line of the battery. You should first remove the quarter inner panel's right quarter trim panel and right D-pillar trim panel. Disconnect the rear HVAC wire harness connector from the end of the resistor connector receptacle. Loosen the two screws attaching the blower motor resistor to the rea heater-A/C unit housing, then pull out the resistor. To fix the new blower motor resistor, screw it into the rear heater-A/C unit housing and tighten the screws to 2 Nm (17 in. lbs.). Reattach the rear HVAC's wire harness connector to the resistor connector receptacle, put in the right quarter and D-pillar trim panels and then link the negative battery cable again.
Resistor
68029175AA
Q: How to Safely Service and Replace a Blower Motor Resistor for Front on Chrysler Voyager?
A:
To service the Blower Motor resistor, first unhook and isolate the air bag system's negative battery cable and allow two minutes for the air bag system capacitor to stop working. Turn the blower motor resistor off for around five minutes if the blower motor was on, as it can easily heat up. Without the resistor hooked up, do not start the blower motor or harm to your vehicle may occur. Fold both sides of the Glove Box inward by opening it and pulling them down. To reach the blower motor resistor, detach the package of wires coming from the instrument panel and from the blower motor, both from the resistor's connector. Open the blower motor resistor by unscrewing its two screws and then remove the resistor. Set the new resistor in the blower motor's housing and use two of the screws to hold it there, turning each screw up to 2 Nm (17 in. lbs.). Connect the blower motor pigtail wire to the back of the dashboard and the blower motor wiring harness wire to the connector opposite of the blower motor. Pull on the glove box grip again to lift the bin up, close and lock the glove box and finish with the negative battery cable.