How to Remove and Install a Vacuum Brake Booster in a Right-Hand Drive on 2003 Chrysler Voyager?

To fix the vacuum brake booster on a right-hand drive car pump out the booster, disconnect the battery and remove the battery and tray. Remove the master cylinder, clean up and replace the booster. Install components again, reconnect wiring, and go for a road test to check if brakes are working.

OEM 2003 Chrysler Voyager Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Boosters found

View related parts
2003 Chrysler Voyager Brake Booster Part Number: 4721721AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Item Weight: 0.60 Pounds
- Item Dimensions: 19.4 x 11.7 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721721AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2003 Chrysler Voyager Brake Booster Part Number: 4721613AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Item Weight: 0.60 Pounds
- Item Dimensions: 16.0 x 12.9 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721613AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2003 Chrysler Voyager Brake Booster Parts and Q&A

Q: How to Remove and Install a Vacuum Brake Booster in a Right-Hand Drive on 2003 Chrysler Voyager?
A: To fix the vacuum brake booster on a right-hand drive car pump out the booster, disconnect the battery and remove the battery and tray. Remove the master cylinder, clean up and replace the booster. Install components again, reconnect wiring, and go for a road test to check if brakes are working.