How to Remove and Install an Ignition Lock Cylinder on 2003 Dodge Durango?

To remove the ignition lock cylinder, insert your key into the ignition, remove the battery's negative cable and take off the top and bottom parts of the steering column. Put the car in PARK, find and hold the retaining pin that's next to the key cylinder assembly, turn the key to RUN and pull out the key cylinder by pressing the retaining pin in. When installing, position the key cylinder in the housing beside the ignition switch and press it in until you hear a click. After that, slip the new shroud on the engine and reattach the battery.

OEM 2003 Dodge Durango Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2003 Dodge Durango Ignition Lock Cylinder Part Number: 5018702AA
$209.61 MSRP: $310.00
You Save: $100.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock - Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder Ignition Lock
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.7 x 1.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018702AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Ignition Lock Cylinder Parts and Q&A

Q: How to Remove and Install an Ignition Lock Cylinder on 2003 Dodge Durango?
A: To remove the ignition lock cylinder, insert your key into the ignition, remove the battery's negative cable and take off the top and bottom parts of the steering column. Put the car in PARK, find and hold the retaining pin that's next to the key cylinder assembly, turn the key to RUN and pull out the key cylinder by pressing the retaining pin in. When installing, position the key cylinder in the housing beside the ignition switch and press it in until you hear a click. After that, slip the new shroud on the engine and reattach the battery.