How to Safely Replace a Hazard Warning Switch with Airbags on 2003 Jeep Liberty?

To change the hazard switch, turn off the airbag system by disconnecting the battery. Take off the radio and the/securing screw and disconnect the switch by pulling the latch tabs. Disconnect the wire harness, take off the switch and fit in the new one by reversing the process. Reconnect the battery afterward.

OEM 2003 Jeep Liberty Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hazard Warning Switch found

View related parts
2003 Jeep Liberty Hazard Switch Part Number: 68499034AA
Product Specifications
- Other Name: Switch - Hazard Warning
- Replaces: 56010158AD
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68499034AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2003 Jeep Liberty Hazard Warning Switch Parts and Q&A

Q: How to Safely Replace a Hazard Warning Switch with Airbags on 2003 Jeep Liberty?
A: To change the hazard switch, turn off the airbag system by disconnecting the battery. Take off the radio and the/securing screw and disconnect the switch by pulling the latch tabs. Disconnect the wire harness, take off the switch and fit in the new one by reversing the process. Reconnect the battery afterward.