How to Perform a Seat Switch Replacement on the Right Power Seat on 2003 Jeep Liberty?

To replace the power seat switch, disconnect the negative battery cable. Pry off the knob on the switch, unscrew the side shield and detach the recliner handle. Disconnect the wire harness and remove the switch and install the new one. Reassemble components and re-connect battery cable.

OEM 2003 Jeep Liberty Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Switches found

View related parts
2003 Jeep Liberty Switch Part Number: 5GW44DX9AC
$34.85 MSRP: $40.00
You Save: $5.15 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Power Seat Switch; Switch Heated Seat
- Replaces: 5GW44DX9AB
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GW44DX9AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2003 Jeep Liberty Seat Switch Part Number: 55352782AB
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch; Switch
- Replaces: 55352782AA
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.3 x 3.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55352782AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2003 Jeep Liberty Seat Switch Parts and Q&A

Q: How to Perform a Seat Switch Replacement on the Right Power Seat on 2003 Jeep Liberty?
A: To replace the power seat switch, disconnect the negative battery cable. Pry off the knob on the switch, unscrew the side shield and detach the recliner handle. Disconnect the wire harness and remove the switch and install the new one. Reassemble components and re-connect battery cable.