How to Diagnose and Fix a Brake Light Switch Issue on 2003 Jeep Wrangler?

Removal of the steering column cover and lower trim panel are necessary so as to repair the brake light switch. To remove the switch, rotate it 30 o. Once the harness has been disconnected install the new switch by lengthening the plunger, attaching the harness and fitting it through screwing clockwise. Push the brake pedal to change the plunger.

OEM 2003 Jeep Wrangler Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2003 Jeep Wrangler Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Rubicon, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2003 Jeep Wrangler Brake Light Switch Parts and Q&A

Q: How to Diagnose and Fix a Brake Light Switch Issue on 2003 Jeep Wrangler?
A: Removal of the steering column cover and lower trim panel are necessary so as to repair the brake light switch. To remove the switch, rotate it 30 o. Once the harness has been disconnected install the new switch by lengthening the plunger, attaching the harness and fitting it through screwing clockwise. Push the brake pedal to change the plunger.