How to Properly Maintain an Oil Filter to Prevent Deformation on 2004 Chrysler Pacifica?

Be sure to fasten the remove/install tool band strap against the base lock seam on the bottom of the filter can to avoid shaping the filter while installing. Get a filter wrench that fits and unscrew the filter from the block after that, throwing it away. Clean the base and take a look at the gasket contact area afterwards. Tom said the engine oil makes it easy to install, just use clean oil to lubricate the gasket and then tighten the filter with the filter wrench for better results. Once done, begin the engine and check to see if any leaks appear.

OEM 2004 Chrysler Pacifica Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2004 Chrysler Pacifica Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2004 Chrysler Pacifica Oil Filter Parts and Q&A

Q: How to Properly Maintain an Oil Filter to Prevent Deformation on 2004 Chrysler Pacifica?
A: Be sure to fasten the remove/install tool band strap against the base lock seam on the bottom of the filter can to avoid shaping the filter while installing. Get a filter wrench that fits and unscrew the filter from the block after that, throwing it away. Clean the base and take a look at the gasket contact area afterwards. Tom said the engine oil makes it easy to install, just use clean oil to lubricate the gasket and then tighten the filter with the filter wrench for better results. Once done, begin the engine and check to see if any leaks appear.