How to Service and Repair a Crankshaft Seal on 2004 Chrysler Pacifica?

Start By Removing The Transaxle From The Vehicle, Then Eliminate The Drive Plate To Drain The Flavor Bearing. Work a 3/16" flat screwdriver carefully up against both the dust lip and the metal case of the crankshaft seal, attracting the screwdriver's blade against the metal to release the crankshaft seal without touching the crankshaft seal surface, but adjacent to the crankshaft edge (Chamfer). Check the condition of the crankshaft edge with Burrs or scratches. If necessary, use 400 grit sandpaper to clean it before application. Then, install Special Tool 6926-1 Guide on the crankshaft so it acts as a pilot tool with its magnetic base. Cover the seal onto the pilot tool such that the lip of the seal points at the crankshaft and leave the pilot tool on the crankshaft to guide the seal in. After all that, insert Special Tool 6926-2 Installer and use C-4171 Handle to drive the seal into the retainer housing until it is even with the housing surface. After that, install the drive plate and transaxle.

OEM 2004 Chrysler Pacifica Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
2004 Chrysler Pacifica Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Chrysler Pacifica Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 4.7 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS
View related parts
2004 Chrysler Pacifica Rear Main Seal Part Number: 4663870
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer Crankshaft Rear Oil Seal See Note; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663870
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Pacifica Submodels:
- Base | 6 Cyl 3.5 L GAS

2004 Chrysler Pacifica Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2004 Chrysler Pacifica?
A: Start By Removing The Transaxle From The Vehicle, Then Eliminate The Drive Plate To Drain The Flavor Bearing. Work a 3/16" flat screwdriver carefully up against both the dust lip and the metal case of the crankshaft seal, attracting the screwdriver's blade against the metal to release the crankshaft seal without touching the crankshaft seal surface, but adjacent to the crankshaft edge (Chamfer). Check the condition of the crankshaft edge with Burrs or scratches. If necessary, use 400 grit sandpaper to clean it before application. Then, install Special Tool 6926-1 Guide on the crankshaft so it acts as a pilot tool with its magnetic base. Cover the seal onto the pilot tool such that the lip of the seal points at the crankshaft and leave the pilot tool on the crankshaft to guide the seal in. After all that, insert Special Tool 6926-2 Installer and use C-4171 Handle to drive the seal into the retainer housing until it is even with the housing surface. After that, install the drive plate and transaxle.