How to service an Oil Pressure Switch on 2004 Chrysler Pacifica?

First, raise the vehicle on a hoist then position an oil collecting container in order to service the oil pressure sender. Unscrew the oil pressure switch from the oil filter adapter or disconnect the electrical connector, as required. In order to install, Mopar Thread Sealant should be applied to the thread of the switch and install the oil pressure switch to the fitting. Reconnect the electrical connector, lower the vehicle, start the engine and look for leaks. And then, check the engine oil level and top off if the oil is low.

OEM 2004 Chrysler Pacifica Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2004 Chrysler Pacifica Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2004 Chrysler Pacifica Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2004 Chrysler Pacifica?
A: First, raise the vehicle on a hoist then position an oil collecting container in order to service the oil pressure sender. Unscrew the oil pressure switch from the oil filter adapter or disconnect the electrical connector, as required. In order to install, Mopar Thread Sealant should be applied to the thread of the switch and install the oil pressure switch to the fitting. Reconnect the electrical connector, lower the vehicle, start the engine and look for leaks. And then, check the engine oil level and top off if the oil is low.