How to Service and Repair a Crankshaft Seal on 2004 Dodge Dakota?

If managing the seal is done inside the car, begin by removing the transmission and the flexplate. After removal, the crankshaft oil seal must be changed and is not useable again. Insert Special Tool 8506 fully into the crankshaft rear oil seal and tighten until the tool won't move further; if you don't tighten it properly, the tool may slip off the seal instead of removing it. Properly lubricate the crankshaft flange, attach your Special Tool 8349-2 to the rear face of the crankshaft and attach the new rear oil seal with the guide. Raise the cylinder installer until it fits tightly against the crankshaft bore with the seal installer by using Special Tool 8349 and the C-4171 Driver Handle and a hammer. After that, you should put in the flexplate and the transmission.

OEM 2004 Dodge Dakota Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2004 Dodge Dakota Rear Main Seal Part Number: 53020788AB
$32.63 MSRP: $48.35
You Save: $15.72 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Dakota Oil Seal, Front Part Number: 53021313AA
$10.49 MSRP: $15.00
You Save: $4.51 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2004 Dodge Dakota Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2004 Dodge Dakota?
A: If managing the seal is done inside the car, begin by removing the transmission and the flexplate. After removal, the crankshaft oil seal must be changed and is not useable again. Insert Special Tool 8506 fully into the crankshaft rear oil seal and tighten until the tool won't move further; if you don't tighten it properly, the tool may slip off the seal instead of removing it. Properly lubricate the crankshaft flange, attach your Special Tool 8349-2 to the rear face of the crankshaft and attach the new rear oil seal with the guide. Raise the cylinder installer until it fits tightly against the crankshaft bore with the seal installer by using Special Tool 8349 and the C-4171 Driver Handle and a hammer. After that, you should put in the flexplate and the transmission.