Other Name: Module - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator; Control Unit Anti-Lock Brake
Item Weight: 7.50 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 5102368AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2004 Dodge Durango Submodels:
Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2004 Dodge Durango ABS Control Module Parts and Q&A
Q: How to Service and Repair an ABS Control Module on 2004 Dodge Durango?
A: The HCU should be removed from the vehicle first, then you need to unscrew the module from its mount to service the EBCM. Take the electrical connector from the pump out of the HCU and pull the pump out of the HCU. First, set the module onto the HCU and attach it using mounting screws, tightening them to 6 Nm (53 in. lbs). Link the pump's power connector to the module and then finish by adding the HCU back to the vehicle. When changing the ABM, remember to set the rear axle type and tires' Mileage Revolutions in the new device, as the axle details are provided in Group 3 Differential and Driveline and described in the Appropriate Diagnostic Service Information.