How to Service and Repair a Speed Sensor on 2004 Dodge Durango?

Prior to servicing or fixing the Transmission Speed Sensor, lift the vehicle and put a suitable container underneath the transmission. Take out the wiring connector from the input speed sensor and rescue any sealing patch that is already installed; it is factory installed and should be used again. Then, take out the bolt connecting the input speed sensor to the transmission case and take the sensor out. Fill up the sealing patch around the bolt with Mopar Lock & Seal Adhesive, insert the sensor into the transmission case and install it. Turn the bolt between 9 Nm (80 inch lbs.) and tighten it. After that, connect the wiring connector to the input speed sensor. Make sure the fluid is at the right level and add some if it is below before you bring the vehicle down.

OEM 2004 Dodge Durango Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2004 Dodge Durango Sensor - Wheel Speed Part Number: 56028668AH
$52.48 MSRP: $77.95
You Save: $25.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- Replaced by: 56028668AG
- SKU: 56028668AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Speed Sensor, Rear Part Number: 5032220AC
Product Specifications
- Other Name: Sensor - Wheel Speed; Rear ABS Wheel Speed Sensor; Anti-Lock Braking System.; Rear Speed Sensor
- Position: Rear
- Replaced by: 5032220AD
- Replaces: 5032220AA, 5032220AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5032220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Sensor - Wheel Speed Part Number: 5032220AD
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- SKU: 5032220AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Durango Submodels:
- Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2004 Dodge Durango Speed Sensor Parts and Q&A

Q: How to Service and Repair a Speed Sensor on 2004 Dodge Durango?
A: Prior to servicing or fixing the Transmission Speed Sensor, lift the vehicle and put a suitable container underneath the transmission. Take out the wiring connector from the input speed sensor and rescue any sealing patch that is already installed; it is factory installed and should be used again. Then, take out the bolt connecting the input speed sensor to the transmission case and take the sensor out. Fill up the sealing patch around the bolt with Mopar Lock & Seal Adhesive, insert the sensor into the transmission case and install it. Turn the bolt between 9 Nm (80 inch lbs.) and tighten it. After that, connect the wiring connector to the input speed sensor. Make sure the fluid is at the right level and add some if it is below before you bring the vehicle down.