Other Name: Valve - Exhaust; Intake Valve; Valves; Valve Exhaust Standard
Item Weight: 1.10 Pounds
Item Dimensions: 9.5 x 5.2 x 1.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 53020748
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Ram 1500 Submodels:
Laramie, SLT, ST, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
2004 Dodge Ram 1500 Exhaust Valve Parts and Q&A
Q: How to Service and Repair Exhaust Valves and Intake Valves on 2004 Dodge Ram 1500?
A: Before servicing or repairing the valve, first take out the cylinder heads. The following steps are to take out the rocker arms and lash adjusters, then the camshaft bearing caps and finally the camshaft. When removing the valve and valve springs, use Special Tool C-3422-B or C-3422-C Valve Spring Compressor with Special Tool 8519 Adapter, slightly tapping the top of the valve spring if it doesn't loosen the locks on the retainer. Handle the valve spring compressor with care while carefully removing the two retainer halves, since the valve spring is held under tension. When you've taken off the valve spring compressor, carefully remove the spring retainer and the coil spring, check for sharp edges in the holder grooves on the cylinder head, clean up any burrs and then take the valve out of its chamber. At this point, take out the valve stem seal and mark the valve stem so the valve can be properly installed, as both intake and exhaust use the same valve stem seal.