How to Remove and Install a Fender Front Fender on 2004 Jeep Grand Cherokee?

In order to take out the front fender, put the place of the front fender, unscrew the fender liner and fascia. Take off screws on the lower bracket, rocker panel and A-pillar. Unscrew the hinge of the hood and take off the fender. In the case of the right fender, take away the radio antenna. Installation Reinstall, screw-aligning, and screw-tightening.

OEM 2004 Jeep Grand Cherokee Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fenders found

View related parts
2004 Jeep Grand Cherokee Fender, Front Passenger Side Part Number: 55135900AC
$410.28
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
- Item Weight: 14.30 Pounds
- Item Dimensions: 52.5 x 36.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55135900AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Jeep Grand Cherokee Fender, Front Driver Side Part Number: 55135901AC
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Item Weight: 16.00 Pounds
- Item Dimensions: 53.3 x 37.0 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55135901AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2004 Jeep Grand Cherokee Fender Parts and Q&A

Q: How to Remove and Install a Fender Front Fender on 2004 Jeep Grand Cherokee?
A: In order to take out the front fender, put the place of the front fender, unscrew the fender liner and fascia. Take off screws on the lower bracket, rocker panel and A-pillar. Unscrew the hinge of the hood and take off the fender. In the case of the right fender, take away the radio antenna. Installation Reinstall, screw-aligning, and screw-tightening.