How to Perform a Seat Switch Replacement for the Passenger Seat on 2004 Jeep Grand Cherokee?

You should disconnect and isolate the battery's negative cable prior to removing the passenger seat switch. If your seat has the ten-way power system, use a push pin remover or a wide flat-bladed object to gently lift the power seat and power recliner switches from the stems. Unscrew the three bolts holding the side shield to the frame and then free the side shield to expose the main wire connector. Take out the wireless harness connector from the switch connector receptacle. After that, take out the two screws securing the power seat switch to the side shield of the outboard seat and remove the switch. Simply mark the switch to place it on the fitted outside cushion shield of the seat and use the two screws to secure it to 1.5 Nm (14 in. lbs.). Fit one end of the power seat wire harness connector into the power seat switch connector receptacle, then put the side shield that comes with the outboard seat cushion onto the frame and attach and tighten it with the three screws to 1.5 Nm (14 in. lbs.). For power seat systems with ten-way adjustment, push and tighten the switch knobs onto the ends of their stems. Lastly, hook the negative terminal of the battery back on.

OEM 2004 Jeep Grand Cherokee Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Seat Switches found

View related parts
2004 Jeep Grand Cherokee Control Switch, Front Part Number: 56049777AA
$110.98 MSRP: $166.00
You Save: $55.02 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front, Front Left; Switch Assembly; Seat Switch; Adjust Handle; Switch; Switch Power Seat; Power Seat Switch
- Position: Front
- Replaces: 4373666
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.9 x 3.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049777AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Base, Laredo, Limited, Orvis, Overland, SE, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, EKY
View related parts
2004 Jeep Grand Cherokee Control Switch, Passenger Side Part Number: 4601756AC
$26.67 MSRP: $84.50
You Save: $57.83 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Right, Right; Power Seat Switch; Seat Switch; Switch
- Position: Passenger Side
- Replaces: 4601756AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.3 x 3.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4601756AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Jeep Grand Cherokee Control Switch, Driver Side Part Number: 4601757AC
$96.02 MSRP: $146.00
You Save: $49.98 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Left, Left; Power Seat Switch; Switch Assembly; Seat Switch; Adjust Handle; Adjuster Switch; Switch
- Position: Driver Side
- Replaces: 4601757AB, 5191951AA
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.6 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4601757AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2004 Jeep Grand Cherokee Switch Part Number: 56033017AB
$60.49 MSRP: $76.68
You Save: $16.19 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56033017AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Jeep Grand Cherokee Switch Part Number: 56033019AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.9 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56033019AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2004 Jeep Grand Cherokee Seat Switch Parts and Q&A

Q: How to Perform a Seat Switch Replacement for the Passenger Seat on 2004 Jeep Grand Cherokee?
A: You should disconnect and isolate the battery's negative cable prior to removing the passenger seat switch. If your seat has the ten-way power system, use a push pin remover or a wide flat-bladed object to gently lift the power seat and power recliner switches from the stems. Unscrew the three bolts holding the side shield to the frame and then free the side shield to expose the main wire connector. Take out the wireless harness connector from the switch connector receptacle. After that, take out the two screws securing the power seat switch to the side shield of the outboard seat and remove the switch. Simply mark the switch to place it on the fitted outside cushion shield of the seat and use the two screws to secure it to 1.5 Nm (14 in. lbs.). Fit one end of the power seat wire harness connector into the power seat switch connector receptacle, then put the side shield that comes with the outboard seat cushion onto the frame and attach and tighten it with the three screws to 1.5 Nm (14 in. lbs.). For power seat systems with ten-way adjustment, push and tighten the switch knobs onto the ends of their stems. Lastly, hook the negative terminal of the battery back on.