OEM 2004 Jeep Liberty Battery Tray

2004 Jeep Liberty Battery Tray Parts and Q&A

• Q: How to maintain a battery tray on 2004 Jeep Liberty?

  A: Before servicing the battery tray, take out the battery first. Second, unlock the PDC and take it out of the battery tray. After that, take out the battery temperature sensor. After that, unlatch the three nuts attaching the battery tray to the weld studs that connect the front extension inner panel of the left front wheelhouse to the frame and remove the battery tray from the car. First, thoroughly clean and examine the battery tray, then place it over the weld studs when you start installation. Set the battery temperature sensor on top of the battery tray and screw the three nuts to 5 Nm (45 in. lbs.). Finally, set up the PDC on the battery tray and push the battery onto the rack.