How to Maintain and Fix a Wheel Hub on 2004 Jeep Liberty?

When servicing the hub, first lift the vehicle, then take off the tire and wheel group, after that, clear the caliper adapter, making sure the caliper isn't touching the hose. After that, take out the disc brake rotor, the wheel speed sensor and the bracket holding the sensor wiring. If the vehicle has four-wheel drive, remove the axle shaft nut and all three hub/bearing assembly mounting bolts and take out the hub/bearing. The installation should start with putting the hub/bearing assembly into place and using the three bolts to secure it, set at 130 Nm (96 ft. lbs.). If four-wheel drive is available, put on the axle shaft nut and tighten it to 135 Nm (100 ft. lbs.). Attach the wheel speed sensor bracket and then set the wheel speed sensor onto the hub. Tighten the screw once more to 13.5 Nm (10 ft. lbs.). Following this, replace the disc brake rotor, then the disc brake caliper adapter, secure the nut to 135 Nm (100 ft. lbs.) and set the wheel back in place.

OEM 2004 Jeep Liberty Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Hubs found

View related parts
2004 Jeep Liberty Hub Assembly, Front Part Number: 52128352AB
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Hub And Bearing Brake; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Front
- Item Weight: 12.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128352AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Hub Assembly, Front Passenger Side Part Number: 52128692AF
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Right Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing
- Position: Front Passenger Side
- Replaces: 52128692AE, 52128692AA, 52128692AB, 52128692AD, 52128692AC
- Item Weight: 12.30 Pounds
- Item Dimensions: 8.4 x 8.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128692AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Hub Assembly, Front Driver Side Part Number: 52128693AF
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Left Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit.; Front Hub & Bearing
- Position: Front Driver Side
- Replaces: 52128693AD, 52128693AC, 52128693AB, 52128693AE, 52128693AA
- Item Weight: 12.90 Pounds
- Item Dimensions: 8.2 x 8.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128693AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2004 Jeep Liberty Wheel Hub Parts and Q&A

Q: How to Maintain and Fix a Wheel Hub on 2004 Jeep Liberty?
A: When servicing the hub, first lift the vehicle, then take off the tire and wheel group, after that, clear the caliper adapter, making sure the caliper isn't touching the hose. After that, take out the disc brake rotor, the wheel speed sensor and the bracket holding the sensor wiring. If the vehicle has four-wheel drive, remove the axle shaft nut and all three hub/bearing assembly mounting bolts and take out the hub/bearing. The installation should start with putting the hub/bearing assembly into place and using the three bolts to secure it, set at 130 Nm (96 ft. lbs.). If four-wheel drive is available, put on the axle shaft nut and tighten it to 135 Nm (100 ft. lbs.). Attach the wheel speed sensor bracket and then set the wheel speed sensor onto the hub. Tighten the screw once more to 13.5 Nm (10 ft. lbs.). Following this, replace the disc brake rotor, then the disc brake caliper adapter, secure the nut to 135 Nm (100 ft. lbs.) and set the wheel back in place.