How to Service and Repair a Crankshaft Seal on 2005 Chrysler Crossfire?

First, take off the engine cooling fan and its shroud, the vibration damper and the accessory drive belt, after disconnecting the battery's negative cable. Drape a cloth over the crankshaft and loosen the front crankshaft oil seal with the right instrument. Make sure to clean any burrs away and remove any deposits of oil from the oil seal's mounting surface as well as the crankshaft's circumference and sealing lip first. Join the Special Tool 9103 with the Insertion Tool by slipping the crankshaft seal onto the tool and ensuring the guide slot on the Insertion Tool lines up with the key on the crankshaft. Apply the insertion tool to the timing chain cover, move the vibration damper bolt into the cover and push with the bolt to insert the seal tightly. Once you take out the Special Tools, set in place the vibration damper, accessory drive belt and engine cooling fan and shroud. After that, reconnect the ground cable at the battery.

OEM 2005 Chrysler Crossfire Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
2005 Chrysler Crossfire Crankshaft Seal, Front Part Number: 5073675AB
$53.33 MSRP: $79.25
You Save: $25.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Crank Seal; Front Seal; Front Cover Seal; Seal Crankshaft Oil Front; Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: 5073675AA, 5073676AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.6 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073675AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Rear Main Seal Part Number: 5099346AB
$27.22 MSRP: $52.05
You Save: $24.83 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 5.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099346AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Retainer, Rear Part Number: 5127283AA
$29.92 MSRP: $34.35
You Save: $4.43 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5127283AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2005 Chrysler Crossfire?
A: First, take off the engine cooling fan and its shroud, the vibration damper and the accessory drive belt, after disconnecting the battery's negative cable. Drape a cloth over the crankshaft and loosen the front crankshaft oil seal with the right instrument. Make sure to clean any burrs away and remove any deposits of oil from the oil seal's mounting surface as well as the crankshaft's circumference and sealing lip first. Join the Special Tool 9103 with the Insertion Tool by slipping the crankshaft seal onto the tool and ensuring the guide slot on the Insertion Tool lines up with the key on the crankshaft. Apply the insertion tool to the timing chain cover, move the vibration damper bolt into the cover and push with the bolt to insert the seal tightly. Once you take out the Special Tools, set in place the vibration damper, accessory drive belt and engine cooling fan and shroud. After that, reconnect the ground cable at the battery.