How to Service and Repair a Crankshaft Seal on 2005 Chrysler Pacifica?

The first step is to take out the transaxle from the vehicle and then take off the drive plate to deal with the crankshaft main bearing seal. Carefully insert a 3/16" wide flat-bladed screwdriver into the gap between the dust lip and the metal case of the crankshaft seal, holding the screwdriver against the metal case to lift the seal; make sure the slide of the screwdriver does not touch the seal itself, although it can touch the edge of the crankshaft. Inspect the crankshaft's edge (chamfer) for any burrs or scratches and use 400 grit sandpaper to clean the area if it is needed to care for seal protection. At this step, secure Special Tool 6926-1 Guide to the crankshaft properly on top as a pilot tool with a magnetic side. Fit the seal gently on top of the pilot tool, so that its lip is over the crankshaft during installation and let the pilot tool stay on the crankshaft the whole time. After that, insert Special Tool 6926-2 Installer into the seal using C-4171 Handle until it reaches the housing's edge and puts the drive plate and transaxle back in place.

OEM 2005 Chrysler Pacifica Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2005 Chrysler Pacifica Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Chrysler Pacifica Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 4.7 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS
View related parts
2005 Chrysler Pacifica Rear Main Seal Part Number: 4654389AB
$26.69 MSRP: $30.65
You Save: $3.96 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Rear Main Seal Retainer; Includes Rear Seal and Crankshaft Rear Oil Seal.
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.3 x 6.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4654389AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base | 6 Cyl 3.8 L GAS
View related parts
2005 Chrysler Pacifica Rear Main Seal Part Number: 4663870AC
$131.33 MSRP: $174.00
You Save: $42.67 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer And Seal Crankshaft Rear Oil
- Position: Rear
- Replaces: 4663870AB
- Item Weight: 1.10 Pounds
- Item Dimensions: 1.1 x 10.5 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663870AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS

2005 Chrysler Pacifica Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2005 Chrysler Pacifica?
A: The first step is to take out the transaxle from the vehicle and then take off the drive plate to deal with the crankshaft main bearing seal. Carefully insert a 3/16" wide flat-bladed screwdriver into the gap between the dust lip and the metal case of the crankshaft seal, holding the screwdriver against the metal case to lift the seal; make sure the slide of the screwdriver does not touch the seal itself, although it can touch the edge of the crankshaft. Inspect the crankshaft's edge (chamfer) for any burrs or scratches and use 400 grit sandpaper to clean the area if it is needed to care for seal protection. At this step, secure Special Tool 6926-1 Guide to the crankshaft properly on top as a pilot tool with a magnetic side. Fit the seal gently on top of the pilot tool, so that its lip is over the crankshaft during installation and let the pilot tool stay on the crankshaft the whole time. After that, insert Special Tool 6926-2 Installer into the seal using C-4171 Handle until it reaches the housing's edge and puts the drive plate and transaxle back in place.