Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
Position: Front
Replaces: 4896023AA, 4686957AC
Item Weight: 0.50 Pounds
Item Dimensions: 3.8 x 2.5 x 1.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4896059AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Caravan Submodels:
Base, C/V, SE, SXT | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
2006 Dodge Caravan Air Bag Sensor Parts and Q&A
Q: How to Service Air Bag Sensors Mounted on the B Pillar on 2006 Dodge Caravan?
A: When servicing impact sensors on the B pillar, lift your hood and remove the negative cable from the battery; the reservoir in the system takes two minutes to discharge before you work on it. Access the area of impact sensor replacement by removing the B-pillar lower trim on that side, unplugging the cognizant image sensor and removing the four bracket screws. Take out the impact sensor from inside the vehicle. To set up the sensor, adhere the base to the car and secure it with four screws, always making sure the tightening amplitude is 7 N.m (62 in. lbs.). Insert the electrical connector again and set the B-pillar lower trim back in place. You mustn't connect the battery's negative terminal until the system assessment has been conducted to ensure your safety. Be sure to check the vehicle and all the systems before you close the hood.